Specific Elderly Housing Design Standards Applicable (Category 1 and Category 2). Additional design standards are applicable; the minimum standards of any special design standards for Elderly Housing that must be applied are shown below.
A self-contained General Needs dwelling should be provided.
- a heated, furnished common room or rooms (2m2/person) should be provided for use by tenants, together with a conveniently located, wheelchair accessible WC with washbasin. Suitable floor coverings, curtains, seating and tables should be provided
- an adjacent chair store (2m2 minimum) should be provided
- an adjacent tea kitchen with a sink and hot water facility should be provided
Associated communal facilities
- laundry room – should be incorporated with at least one sink, washing machine and tumble dryer, also a table or bench for folding clothes
- guest room – should be provided, heated and furnished of double bedroom size and situated near a communal toilet or en suite facilities provided
- emergency alarm system – provided connecting each dwelling with the warden in case of emergency - a transfer facility should be incorporated for use when the warden is absent
- office – for the warden’s use should be provided close to the main entrance
- wheelchair accessible via heated and enclosed circulation where appropriate
Note: Communal facilities are optional for Category 1, and mandatory for Category 2.
Inside the home
Design standards in relation to Elderly Housing (Category 1 & Category 2) Door and Corridor Widths are summarised in Table 8: Door and Corridor Widths in Elderly (Category 1 & 2)
Supported Housing (Accessible Criteria) – the above criteria will normally suffice for this type of housing, but may need to take account of special space and facility requirements need by some tenants, including multi-wheelchair user environments.